T-Series In-Line

Description

No other range of high performance in-line duct fan offers a combination of 3 impeller diameters, reversibility, low sound level, speed control and built-in electric shutter. T-Series features a unique speed control pack which enables high, medium or low speed to be preset to suit room size or required duty. Designed for use with rigid or flexible ducting, T-Series In-Line models can be plate mounted or fixed through partitions and in ceiling voids. T-Series built right, built tight, built bright.

T-Series controllers may be used with this model to obtain a choice of speeds, extract/intake airflow direction and automatic sensor operation.The Vent-Axia Ecotronic controller gives even greater running economy with its minimum speed setting and 'E' mode.

Shutter

Supplied complete with an integral instantaneous automatic louvre shutter.It will operate on both intake and extract and at any angle of mounting.

The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum backdraught protection.

When the ventilating unit is used with a T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.

Arrangements

Where ducts pass through an unheated roof void, the ductshould be insulated.Horizontal ducts should fall away from the fan unit. In circumstances where an excessive amount of moisture is present, a condensation trap should be installed in the exhaust duct.The fan unit should be accessible for regular maintenance.

Motor

Motor purpose-designed. Suitable for running at any angle. Quiet running, enclosed.

Electrical

Suitable for operation in ambient temperatures from -40°C to +50°C.
Fitted with non-self resetting Thermal Overload Protection.
Supply voltage 220-240V/1/50 Hz.

Easy Cleaning

Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools.

Controllers and Sensors

T-Series Controller Three speeds. Choice of extract/intake Shutter open, fan Off setting Sensor mode. Enables external electro mechanical switches, eg: Ecotronic, HumidiSwitch, ThermoSwitch and TimeSwitch to control the fan.

Ecotronic 130 Controller All the features of T-Series:- Infinitely variable speed control 'E' position for energy saving Minimum speed adjustment.

Ecotronic 400 Controller For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.

Ambient Response Humidity Sensor Self programming electronic On/Off wall mounted humidity sensor which reacts to any rapid increase in humidity and temperature.Night time RH increment setback feature.

Perfomance

Dimensions (mm)

Technical Data