|
|
Forside  Produkter Højtemperaturventilatorer
Brandventilatorer og højtemperaturventilatorer.
Kontinuerligt eller op til 4H.
Brandventilation, røgventilation og højtemperaturventilation.
|
CHT_
Centrifugal roof fans- Base-plate for roof installation.
- Backward-curved turbine. Dynamically balanced, low sound level.
- Asynchronous motors with squirrel-cage rotor.
- Single-phase 230V, 50 Hz, IP-54 protection, class F insulation.
- Three-phase 230/400V, 50 Hz, IP-55 protection, class F insulation.
- Cowl with anti-corrosive protection.
- Standardised safety guard in accordance to DIN 24167.
- Aluminium cooling wheel.
- On request:
- 2-speed three-phase motors.
- 60 Hz motors.
- Explosion-proof (Ex“e”) and flame-proof (Eex“d”) motors.
Our roof fans are equipped for continuous work with fluid at 120° C; maximum temperature: 400°C/2hours.
Mere info... |
|
CHT_V
Centrifugal roof fans- Base-plate in cold laminated steel for roof installation.
- Backward-curved turbine. Dynamically balanced, low sound level.
- Asynchronous motors with squirrel-cage rotor. Single-phase 230V, 50 Hz, IP-54 protection, class F insulation, Three-phase 230/400V, 50 Hz, IP-55 protection, class F insulation.
- Cowl with anti-corrosive protection.
- Standardised safety guard in accordance to DIN 24167.
- Aluminium cooling wheel.
- On request:
- 2-speed three-phase motors.
- 60 Hz motors.
- Explosion-proof (Ex“e”) and flame-proof (Eex“d”) motors.
Our roof fans are equipped for continuous work with fluid at 120° C; maximum temperature: 400°C/2hours.
Mere info... |
|
CJLINE
400°C/2h in line ventilation units.- In line ventilation unit, equipped with backward curved impeller, whose main feature is the linear air circulation between intake and impulsion, which facilitates installation and dismounting without having to handle the installation ducts.
- Specially designed to be installed between rectangular ducts.
- The possibility of disassembling motor-turbine unit allows easy fan maintenance without having to dismantle the installation.
CJLINE: Duct fan certified for air flow at 400°C/2h, and specially designed to evacuate gases and fumes from car parks or cooker hoods, where the fan should be installed in areas away from fire hazards.
CJLINE/T: Duct fan certified to work at temperatures up to 400°C/2h, and specially designed for the evacuation of gases and fumes from car parks or shopping centres, where the fan is installed within a fire hazard zone.
Mere info... |
|
CJMD
400°C/2h ventilation units comprised of:- Duct fan 400°C/2h, specially designed and certified for operation in fire hazard areas, whose main feature is the in line air flow between inlet and outlet.
- Made from galvanized sheet steel with thermal and acoustic insulation, provided with inspection cover.
- Ventilation units certified in the LGAI laboratory in accordance with European norm EN-12101-3.
Mere info... |
|
CJMP
400° C/2h ventilation units comprised of:- Box with thermal and acoustic insulation, certified in the LGAI laboratory in accordance with European norm EN-12101-3 to withstand 400°C/2h.
- Specially designed and tested to withstand the harsh working conditions involved in the evacuation of gases at 400° C/2h.
- TCMP series centrifugal fan, certified for continuous work at 400°C/2h and 250°C in accordance with European norm EN-12101-3.
Mere info... |
|
CJS
400°C/2h. Ventilation units- Series certified by LGAI according to European Norm EN 12101-3.
- 400 °C/2h ventilation units, specially designed for working INSIDE fire risk zones, its principal characteristic is the lineal air circulation between inlet and outlet.
- Manufactured in galvanised sheet steel with thermal and acoustic insulation.
- Outlet mounting on any side possible. Inspection hatches on each side of the unit.
- Three-phase motors 230/400V, IP-55 protection with LGAI or CTICM certification.
- Standard models with rectangular outlet.
TAC accessory available on request in order to convert rectangular outlet to circular.
Mere info... |
|
CJSX
400°C/2h simple intake belt driven ventilation units.- Series with CTICM certification: N° 00-E-226 and N° 01-E-121, in accordance with the EN 12101-3 European Standard.
- Compact ventilation units, operated with transmissions for the flow of air at 400°C/2h and specially designed to work outside areas where there is a risk of fire.
- Built of galvanised sheet steel with thermal and acoustic insulation, provided with inspection cover. Said cover is used to inspect the fan and is equipped with an electrical motor, straps and pulleys.
- Standardised 230/400V 50Hz motors, up to 5,5V and 400-690V 50Hz for higher power requirements. Class F electrical insulation and IP-55 protection.
- On request:
- The fan can be requested with vertical discharge
Mere info... |
|
CJTCR/R
400° C/2h ventilation units comprised of:- Box with thermal and acoustic insulation, Certified in the LGAI laboratory in accordance with European norm EN-12101-3.
- TCR/R series CENTRIFUGAL fan, certified for continuous work at 250°C and for 400°C/2 h., in accordance with European regulation EN-12101-3.
Mere info... |
|
CJTHT
400°C/2h ventilation unit comprised of:- Box with thermal and acoustic insulation, certified in the LGAI laboratory, in accordance with European regulation EN12101-3, to withstand 400°C/2h.
- Specially designed and tested to withstand the harsh working conditions involved in the evacuation of gases at 400°C/2h.
- THT axial fan series, certified in the LGAI to work at temperatures of up to 400°C/2 h in accordance with European standard EN-12101-3.
Mere info... |
|
CJTHT_REV
400°c/2h acoustic smoke evacuation units. Reversible and two-speed- Ventilation boxes with thermal and acoustic insulation, LGAI certified for smoke extraction at 400°c/2H, according to European standard EN-12101-3.
- THT series fans LGAI certified for smoke extraction at 400°c/2/h according to European standard EN-1201-3.
- Telescopic, bi-directional fixed sheet grille, adaptable for different wall thicknesses. Easy to install.
- Safety guard to avoid hand contacts, in compliance with DIN 24167.
- 50 Hz three-phase motors, with IP-55 protection certified by LGAI or CTICM. TWO speed with DHALANDER type winding.
- On request:
- ONE or TWO speed motors for temperatures of 200°C/2h.
- Safety switch standardised to 200°c/2Hh, IAT-200 series, built into the extractor.
Mere info... |
|
CJTX
400°C/2h double aspiration belt driven ventilation units:- Ventilation unit equipped with double inlet V-belt fans and certified by the LGAI laboratory as confirming to European Norm EN-12101-3 to handle air at 400°C/2h. Specifically designed for working outside fire risk zones.
- Galvanised sheet steel construction including electric motor, belts, pulleys, shafts and V-belt protection guard.
- Motor protection IP55 and class F insulation.
Mere info... |
|
CTMP
Medium pressure centrifugal fans with multi-blade turbine- Series with LGAI certification according to European regulation EN 12101-3.
- CTMP centrifugal fans series allows operation with the motor working with temperatures of up to 400°C/2 hours.
- Three-phase motor 50 Hz..IP-55 protection, with LGAI or CTICM certification.
- Sheet steel housing.
- Galvanized sheet steel impeller
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- On request:
- Fans with motors for operating in temperatures of up to 200°C/2 hours.
- Fans with two speed motors for operating in temperatures of up to 200°C/2h and 400°C/2h.
- Belt driven fans.
Mere info... |
|
HTMF
Multifunctional 400°C/2h roof extractor- THT series fans, tested for smoke/gas extraction at 400°c/2/h in LGAI laboratory and meeting European standard EN-12101-3.
- Base plate in cold laminated steel.
- Protection guard against birds, meeting standard DIN-24167.
- Cowl in cold laminated steel, with natural air exit vent.
- Three-phase 50 Hz motors, with IP-55 protection certified by LGAI or CTICM, with ONE or TWO speeds, according to model.
- On request:
- ONE or TWO speed motors for temperatures up to 200°C/2h.
- Safety switch standardised to 200°c/2Hh, IAT-200 series, built into the extractor.
Mere info... |
|
TCMP
Medium pressure centrifugal fans with multi-blade turbine- TCMP centrifugal fan series allows ASPIRATION of air at temperatures of up to 400°C/2 hours.
- Maximum exterior temperature 70°C.
- Three-phase motor 50 Hz. IP-55 protection. Class F insulation. Certified to IEC 34.1(UNE 20113), VDE 0530 standards.
- Sheet steel housing.
- Galvanized sheet steel impeller.
- Maximum airflow temperature: 250°C continuous work
- Epoxy resin powder anticorrosive finishing, zinc phosphate treated and kiln dried.
- Series tested in accordance with European regulation prEN 12101-3.
- Available on demand:
Fans with motors for operating in temperatures of up to 200°C/2 h. Fans with two speed motors for operating in temperatures of up to 200°C/2h and 400°C/2h. Belt driven fans.
Mere info... |
|
TCR
400° C/2h Centrifugal fans- Series tested with LGAI certification according to European standard norm: EN 12101-3.
- TCR centrifugal series can OPERATE with the MOTOR WORKING in environments up to 400° C/2 hours.
- 50 Hz three-phase motors. IP-55 protection, with LGAI and CTICM certification.
- Housing and turbine made of rolled steel.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- Turbine finished in heat-resistant paint.
- On request:
- Fans with motor for temperatures of 200° C/2 hours.
- Fans with two-speed motor for temperatures up to 200°C/2h and 400° C/2h.
- Belt-driven fans.
Mere info... |
|
TCR/R
400° C/2h Centrifugal fans- Series tested with LGAI certification according to European standard norm: EN 12101-3.
- TCR/R range can transport air heated up to of 400° C/2 hours and up to 600° C/1 hour, with a maximum environment temperature of 70° C.
- 50 Hz three-phase motors with IP-55 protection. Class F insulation. Standardised according to IEC 34.1 (UNE 20113), VDE 0530.
- Housing and turbine made of rolled steel.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- Turbine finished in heat-resistant paint.
- Max. air-flow temperature: 250° C continuously.
- On request:
- Fans with motor for temperatures up 200° C/2 hours.
- Fans with two-speed motor
- Belt-driven fans.
Mere info... |
|
THT
400° C/2 h Long cased axial fans - Reinforced rolled steel housing (available in two lengths) and variable pitch cast aluminium impeller.
- Long housing version supplied with motor inspection door.
- 50 Hz three-phase motors. , IP-55 protection. Approved according to 88G166 CTICM (400° C/2 h.).
- Series tested according to European standard: prEN 12101-3.
- On request:
- Fans with motors for temperatures up 200° C/2 hours.
- Fans with two-speed motors for temperatures up to
200°C/2h and 400° C/2h.
Mere info... |
|
THT_IMP
Single direction or 100% reversible circular or rectangular long-range impulsion fans- Sets with single direction and reversible fan + silencers + deflectors – support for 400° C/2h and 200° C/2h smoke extraction, meeting to European standard EN-12101-3.
- Anti-corrosive galvanised sheet steel casing, rectangular for model THT/IMP-R and circular for THT/IMP.
- Inspection hatch for access to motor.
- Aluminium impellers with variable pitch, specially designed for optimum impulsion.
- Highly effective silencers with thermal and acoustic insulation, standardised to 400°c/2H.
- Protection guard against birds, meeting standard DIN-24167 in SINGLE DIRECTION models.
- Deflector to increase airflow range on the outlet side of fans. REVERSIBLE models have DEFLECTORS on both sides.
- 50 Hz three-phase motors, with IP54 protection certified by LGAI or CTICM. TWO speed with DHALANDER type winding.
- Base plate specially designed to support the entire unit, with anti-vibration damper springs from 500 mm diameter upwards.
- IAT-200 series safety switch standardised to 200°c/2Hh meeting European standard EN-1201-3, built into the THT/IMP-R
(Rectangular) fan.- On request:
- ONE speed motors for temperatures of 400° C/2h and 200° C/2h.
- IAT-200 series safety switch standardised to 200°c/2h built into the circular fan.
- Different impulsion power from that described above.
Mere info... |
Resultater 1 - 18 af 18
|
