|
|
Forside  Produkter EX Ventilation og ATEX Aksialventilatorer
Høj volumen, lavere tryk.
|
HCDF
Flame-resistant axial fans- Aluminium sheet frame (to avoid sparks).
- Cast aluminium impeller (to avoid sparks).
- 230/400 V 50Hz (EEx-d) II BT4 motor in compliance with standard EN 50014 and EN 50018, officially ATEX approved.
- IP-55 protection and class F insulation.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- Stuffing-box included.
- On request the following can be supplied:
- CE Mark Ex II 2 D Eex D
- Tubular execution (HDF)
Mere info... |
|
HCH
Axial fans- Rolled sheet steel casing.
- IP-55 protected external connection box (HCT).
- Impeller: variable pitch blades, which can be supplied in 2 versions:
- Version PL: reinforced fibreglass polyamide 6 hub and blades (Aluminium hub in models 80, 90 and 100).
- Version AL: aluminium cast impellers.
- HCT-40-2T and HCT-45-2T only available in aluminium.
- Standard motors 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units; single-phase 230V, 50 Hz motors
- IP-55, class F protection (IP-54 models 45-4M-0.5 and 56-4M-0.75)
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
On request:- Impellers with impeller to motor airflow direction.
- 100% reversible impellers
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
Mere info... |
|
HCT
Axial fans- Rolled sheet steel casing.
- IP-55 protected external connection box (HCT).
- Impeller: variable pitch blades, which can be supplied in 2 versions:
- Version PL: reinforced fibreglass polyamide 6 hub and blades (Aluminium hub in models 80, 90 and 100).
- Version AL: aluminium cast impellers.
- HCT-40-2T and HCT-45-2T only available in aluminium.
- Standard motors 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units; single-phase 230V, 50 Hz motors, IP-55, class F protection (IP-54 models 45-4M-0.5 and 56-4M-0.75)
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
On request:- Impellers with impeller to motor airflow direction.
- 100% reversible impellers
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
Mere info... |
|
HDF
Flame-resistant axial fans- Sheet steel housing with internal aluminium ring (to avoid sparks).
- Cast aluminium impeller (to avoid sparks).
- 230/400 V 50Hz (EEx-d) II BT4 motor in compliance with standard EN 50014 and EN 50018, officially ATEX approved.
- IP-55 protection and class F insulation.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- Stuffing-box included.
- On request the following can be supplied:
- CE Mark Ex II 2 D Eex D
- Long cased version (HDF).
Mere info... |
|
HGT
Large diameter long cased axial fans- HGT Reinforced sheet steel housing (available in two lengths)
- Long housing version includes inspection door.
- Cast aluminium variable pitch impeller, 3, 6 or 9 blades.
- Standardised motors 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units.
- Class F electrical insulation, IP 55 protection.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- These fans can be supplied on request:
- Airflow-in impellers: airflow direction from the impeller to the motor.
- 100% reversible impeller.
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
- 400° C/ 2 hours and 200° C/ 2 hours one and two speed motors.(HGT)
Mere info... |
|
HGTX
Large diameter long cased axial fans- HGTX Housing reinforced in rolled sheet steel and with inspection/cleaning door.
- Trapezoidal pulley and belt transmission.
- Transmission set with ball bearings.
- Max. Temperature of transported air: 120°C.
- Cast aluminium variable pitch impeller, 3, 6 or 9 blades.
- Standardized motors 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units.
Class F electrical insulation and IP 55 protection. Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.- These fans can be supplied on request with:
- Airflow-in impellers: airflow direction from the impeller to the motor.
- 100% reversible impellers.
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
- 400° C/ 2 h and 200° C/ 2 h (HGT) motors.
Mere info... |
|
HPX
Long cased axial fans with external motor- Sheet steel housing.
- Semi-enveloping top (opens 180°).
- Cast aluminium impeller.
- Trapezoidal pulley and belt transmission.
- Sealed transmission unit with ball bearings and double retention
- system IP-66.
- Maximum air flow temperature 150°
- Standardized motor 230/400V, 50 Hz up to 5.5 HP, and 400/690V, for more powerful units.
- IP-55 protection.
- Class F insulation.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- These fans can be supplied on request with:
- Other protection systems, voltages and frequencies available on request.
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
Mere info... |
Resultater 1 - 7 af 7
|
