|
|
Forside  Produkter Centrifugalventilatorer Højtryk
3.000 Pa statisk tryk og opefter
|
CA
High-pressure centrifugal fans- Reinforced cast aluminium housing.
- (High performance) cast aluminium turbine.
- Max. air flow temperature: 120° C.
- Asynchronous motors, with squirrel-cage rotor.
- Standard models supplied with three-phase 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units; single-phase 230V, 50 Hz motors.
- Class F electrical insulation.
- IP-55 protection.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- On request:
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
- The fan with capacity to transport air at up to a maximum temperature of 250°C.
Mere info... |
|
CAM
High-pressure centrifugal fans- Sheet steel housing.
- Cast aluminium turbine.
- Rolled steel turbine on 752 and 880 models.
- Maximum airflow temperature: 120° C.
- Asynchronous motors, with squirrel-cage rotor.
- Standard models supplied with three-phase 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units.
- Class F electrical insulation.
- IP-55 protection.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- On request:
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
- The fan with capacity to transport air at up to a maximum temperature of 250°C.
Mere info... |
|
CAM-A-PLUS
High-pressure centrifugal fans- Impeller diameter up to: 1121mm.
- Motor output power up to: 55 kWmax.
Max. airflow: 54,000m3/h.- Max. total pressure: 570 mmcda.
- Application: aspiration of air with high dust concentration.
Mere info... |
|
CAM-B-PLUS
High-pressure centrifugal fans- Impeller diameter up to: 1121mm.
- Motor output power up to: 55 kWmax.
- Max. airflow: 54,000m3/h.
- Total pressure: 570 mmcda.
- Application: aspiration of air with high dust concentration.
Mere info... |
|
CAMX-PLUS
High-pressure centrifugal fans- Impeller diameter up to: 1800mm.
- Motor output power up to: 315 kWmax.
- Max airflow: 200,000m3/h.
- Max total pressure: 800 mmcda.
- Application: aspiration of air with high dust concentration.
Mere info... |
|
CAS
High-pressure centrifugal fans- Sheet steel frame.
- Cast aluminium impellers (242,248,254,260,640,645,650) and rolled sheet steel (remaining models) with high performance backward impeller.
- Aerodynamically tested to achieve maximum output with minimum sound level.
- Maximum continuous air flow temperature: 120°C.
- Asynchronous motor with squirrel cage rotor.
- Standard models supplied with three-phase 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units.
- Class F electrical insulation.
- IP-55 protection.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- Available on request:
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
- Fan capable of a maximum air flow temperature of 250°C.
- Stainless steel construction AISI304 or AISI-316.
The CAS-S variant is supplied with an incorporated silencer in the fan inlet.
The silencer has a hexagonal profile, is small and built in galvanised sheet steel and sound insulating materials. Highly variable, its special design allows for inlet airflow to be adjusted.
Mere info... |
|
CAS-PLUS
High-pressure centrifugal fans- Impeller diameter up to: 1800 mm.
- Motor output power up to: 560 kW.
- Max. airflow: 180,000 m3/h.
- Max. total pressure: 2,200 mmcda.
- Application: impulsion of air for pneumatic transport, burners or transport of dust loaded air.
Mere info... |
|
CAS-S
High-pressure centrifugal fans- Sheet steel frame
- Cast aluminium impellers (242,248,254,260,640,645,650) and rolled sheet steel (remaining models) with high performance backward impeller.
- Aerodynamically tested to achieve maximum output with minimum sound level.
- Maximum continuous air flow temperature: 120°C
- Asynchronous motor with squirrel cage rotor.
- Standard models supplied with three-phase 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units
- Class F electrical insulation.
- IP-55 protection.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- Available on request:
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
- Fan capable of a maximum air flow temperature of 250°C.
- Stainless steel construction AISI304 or AISI-316.
The CAS-S variant is supplied with an incorporated silencer in the fan inlet.
The silencer has a hexagonal profile, is small and built in galvanised sheet steel and sound insulating materials. Highly variable, its special design allows for inlet airflow to be adjusted.
Mere info... |
|
CAS-XPLUS
High-pressure centrifugal fans- Impeller diameter up to: 1800 mm.
- Motor output power up to: 560 kW.
- Max. airflow: 180,000 m3/h.
- Max. total pressure: 2,200 mmcda.
- Application: impulsion of air for pneumatics transport, burners or transport of dust loaded air.
Mere info... |
|
CAST
High pressure centrifugal fans- Casing in rolled sheet steel.
- Sheet steel impeller with blades designed to transport powder and solid material.
- Maximum airflow temperature: 120°C.
- Asynchronous motors with squirrel-cage rotor.
- Standard models supplied with three-phase 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units.
- Class F insulation.
- IP 55 protection.
- Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
- On request:
- Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.
Mere info... |
|
Syrefast ventilator VSB
Hus i sprøjtestøbt polypropylen.
Ventilatorhjul med fremadkrummede skovle, udført i polypropylen, grafitforstærket nylonnav.
Stativ i PVC
Leveres med norm motorer, 1 eller 3 faset, eller specialmotorer f.eks. regulerbar, 2-hastigheds, eksplosionssikker samt eksplosion- og tryksikker.
Speciel akselpakning beskytter motor mod syreangreb
Mere info... |
Resultater 1 - 16 af 16
|
