• One shot die cast impeller, dynamically balanced for smoother operation
• External Rotor Motors on all models for compact efficient design
• All models speed controllable and can be wired for reverse running
• Guards fitted as standard on all models
• Thermal Overload Protection for motor protection
• Maintenance free sealed for life bearings
• 2 Year Guarantee

• Sheet steel support frame.
• Polyamide 6 fibreglass- reinforced impeller; dynamically balanced in compliance with ISO 1940 standard.
• Asynchronous motors, with squirrel-cage rotor with ball bearings.
• IP-55 Protection (IP-54 models 45-4M/H, 50-4M/H, 50-6M/H,
• 56-4M/L, 56-6M/H, 63-4M/L and 63-6M/H).
• Class F insulation. Standard models can operate at temperatures between -25° C +60° C.
• Standard models supplied with three-phase 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units.
• Single-phase 230V, 50 Hz motors.
• Motor support including protection guard according to 24167 DIN and 20-359-74 UNE standards, except in models 71, 80, 90 and 100 where the guard can be ordered as an accessory.
• Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
• Windings can be supplied on request for 230/400 V, 60 Hz; 254-280/ 440-480 V, 60 Hz.

• Rolled sheet steel support frame.
• Aluminium sheet impeller.
• Motor for models 20,25,30 and 35:
• Single-phase, four-pole shading ring 230V, closed construction, IP-44 insulation, class B self-protecting and self-lubricated.
• Working temperature: -30°C +50°C.
• Motor model 40.
• Single-phase, asynchronous motor with squirrel-cage rotor and ball bearings, 230V.
• IP-54 class F protection.
• Class F insulation.
• Standard model can operate at temperatures between -25°C + 60°C.
• Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.

• Aluminium sheet frame (to avoid sparks).
• Cast aluminium impeller (to avoid sparks).
• 230/400 V 50Hz (EEx-d) II BT4 motor in compliance with standard EN 50014 and EN 50018, officially ATEX approved.
• IP-55 protection and class F insulation.
• Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
• Stuffing-box included.
• On request the following can be supplied:
• CE Mark Ex II 2 D Eex D
• Tubular execution (HDF)

• Rolled sheet steel casing.
• IP-55 protected external connection box (HCT).
• Impeller: variable pitch blades, which can be supplied in 2 versions:
• Version PL: reinforced fibreglass polyamide 6 hub and blades (Aluminium hub in models 80, 90 and 100).
• Version AL: aluminium cast impellers.
• HCT-40-2T and HCT-45-2T only available in aluminium.
• Standard motors 230/400V, 50 Hz up to 5.5 HP, and 400/690V, 50 Hz for more powerful units; single-phase 230V, 50 Hz motors
• IP-55, class F protection (IP-54 models 45-4M-0.5 and 56-4M-0.75)
• Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.

• Impellers with impeller to motor airflow direction.
• 100% reversible impellers
• Category 2 ATEX certification for explosive atmospheres and CE Mark Ex II 2 G/D Eex E or D.

• Rolled sheet steel casing.
• IP-55 protected external connection box (HCT).
• Impeller: variable pitch blades, which can be supplied in 2 versions:
• AL Versions with impellers in cast aluminium.
• Standardised motors 230/400 V, 50 Hz, and single-phase 230V IP-55 protection, class F insulation. (IP-54 models 45-4M-0.5 and 56-4M-0.75)
• Epoxy resin powder, zinc-phosphated and kiln dried at 200°C.
• On request:
• Impellers with impeller to motor air-flow direction.
• 100% reversible impellers
• Explosion and fireproof two speed motors.

• Rolled sheet steel casing.
• IP-55 protected external connection box (HCT).
• Impeller: variable pitch blades, which can be supplied in 2 versions:
• Version PL: reinforced fibreglass polyamide 6 hub and blades (Aluminium hub in models 80, 90 and 100).
• Version AL: aluminium cast impellers.
• HCT-40-2T and HCT-45-2T models only available in aluminium.
• Standardised motors 230/400 V, 50 Hz and single-phase 230V 50 Hz.
• IP-55 protection and class F insulation (IP-54 models 45-4M-0.5 and 56-4M-0.75).
• Epoxy resin powder, zinc-phosphated and kiln dried at 200°C.
• On request:
• Impellers with impeller to motor airflow direction.
• 100% reversible impellers
• Explosion and fireproof two speed motors.

• Rolled sheet steel casing.
• IP-55 protected external connection box (HCT).
• Impeller: variable pitch blades, which can be supplied in 2 versions:
• Version AL: aluminium cast impellers.
• HCT-40-2T and HCT-45-2T only available in aluminium.
• Standardised motors 230/400 V, 50 Hz, and single-phase 230V 50 Hz.
• Class F insulation and IP-55 protection. (IP-54 models 45-4M-0.5 and 56-4M-0.75)
• Epoxy resin powder finish, zinc-phosphated and kiln dried at 200°C.
• On request:
• Impellers with air-flow direction: impeller to motor.
• 100% Reversible impellers
• Explosion and fireproof two speed motors.

• Rolled sheet steel casing.
• IP-55 protected external connection box (HCT).
• Impeller: variable pitch blades, which can be supplied in 2 versions:
• Version AL: cast aluminium impellers.
• HCT-40-2T and HCT-45-2T only available in aluminium.
• Epoxy resin powder, zinc-phosphated and kiln dried at 200°C.
• On request:
• Aspiration impellers with impeller to motor airflow direction.
• 100% reversible impellers
• Explosion and fireproof two speed motors.

• Sheet steel housing with internal aluminium ring (to avoid sparks).
• Cast aluminium impeller (to avoid sparks).
• 230/400 V 50Hz (EEx-d) II BT4 motor in compliance with standard EN 50014 and EN 50018, officially ATEX approved.
• IP-55 protection and class F insulation.
• Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
• Stuffing-box included.
• On request the following can be supplied:
• CE Mark Ex II 2 D Eex D
• Long cased version (HDF).

Fan:

• Sheet steel support frame.
• Rolled steel-sheet long housing. (HEPT).
• External connection box, IP-65 protection. (HEPT).
• Motor support with safety guard, in compliance with DIN 24167 and UNE 20-359-74 standards.
• Polyamide 6 fibreglass-reinforced impeller; dynamically balanced in compliance with ISO 1940 standard.
• Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.
• Supplied with connection box or without box on demand. (HEP)

• Asynchronous motors, with squirrel-cage rotor.
• Standard motors supplied with three-phase 220-240/380-415 V 50 Hz and single-phase 220-240 V, 50 Hz motor.
• Class F insulation and IP65 protection.
• Standard models can operate at temperatures between -25°C +60°C 4-6 and 8 Pole motors, and -25°C +45°C 2 pole motors.

• All motors are fitted with thermal protection (Klixon) to avoid overheating produced by any type of anomaly.

• Axial fan designed to move large volumes of air at low speed, with low noise level and easy maintenance.
• Low output power unit, particularly suitable for poultry and livestock farms, greenhouses, drying rooms, industrial facilities, sports centres, etc.
• Housing made entirely of anticorrosive galvanized sheet metal.
• Standardised 230-400V, 50 Hz and 254-280/400-480V. 60 Hz motors, easily exchangeable.
• Class F electrical insulation.
• IP-54 protection.
• Galvanized sheet steel impeller.
• Galvanized safety guard.
• Supplied with backdraught louvre made of galvanized steel with automatic opening system.

• Frame in rolled sheet steel.
• Impeller in sheet steel.
• Asynchronous external rotor motors.
• Three-phase 230/400V, 50 Hz.
• Single-phase 230V, 50 Hz.
• Single-phase with thermal protection included, with automatic reset.
• Terminal box on the motors.
• Working temperature: -25°C +50°C
• Anticorrosive finish in polyester resin, polymerised at 180°C, after degreasing, phosphating and passivation pre-treatment.

Axial fans

• Ventilators specially designed for operation in ceramic and wooden driers, environments with maximum temperature of 135ºC and 100% humidity.
• Reinforced casing in 5754 aluminium and support motor in stainless steel X5CrNi18 F-3504.
• Variable paddle helix in cast aluminium, 100% reversible.
• 50 Hz three-phase motors. Class H insulation and IP-55 protection.
• Dynamically balanced in accordance with ISO-1940 Q6.3.

Axial fans

• Ventilators specially designed for operation in ceramic and wooden driers, environments with a maximum temperature of 85ºC and 100% humidity.
• Reinforced casing in stainless steel X5CrNi18 F-3504.
• Variable paddle helix in cast aluminium, 100% reversible.
• 50 Hz three-phase motors. Class F insulation and IP-55 protection.
• Dynamically balanced in accordance with ISO-1940 Q6.3.

Fan:

• Support frame in heat galvanized steel plate.
• Steel plate support arms.
• Support motor with contact protection grill, in accordance with standards DIN 24167 and UNE 20-359-74.
• Polyamide 6 helix reinforced with fibreglass; dynamically balanced in accordance with ISO standard 1940.
• Anti-corrosive finish specially designed for operation on farms.
Motor:
• Asynchronous motors, with squirrel cage rotor.
• Standard series supplied with three-phase motor.
220-240/380-415 V 50 Hz and mono-phase 220-240 V, 50 Hz.
• Class F insulation and IP-65 protection.
• The standard models can operate at temperature between:-25°C+70°C motors of 4-6-8 poles, and -25°C+ 45°C motors with 2 poles.
Thermal protection:
• The entire range of motors is supplied with thermal protection (Klixon) included to protect the motor from overheating due to any anomaly.

Mere info...

Fan:

• Sheet steel support frame.
• Motor support with safety guard, in compliance with DIN 24167 and UNE 20-359-74 standards.
• Polyamide 6 fibreglass-reinforced impeller; dynamically balanced in compliance with ISO 1940 standard.
• Anticorrosive finish especially designed for work on farms

• Asynchronous motors, with squirrel-cage rotor.
• Standard motors supplied with three-phase 220-240/380-415 V 50 Hz and single-phase 220-240 V, 50 Hz motor.
• Class F insulation and IP-65 protection.
• Standard models can operate at temperatures between -25°C +70°C 4-6 and 8 Pole motors, and -25°C +45°C 2 pole motors.

• All motors are fitted with thermal protection (Klixon) to avoid overheating produced by any type of anomaly.